Description:Alloy 825 (UNS N08825) is an austenitic nickel-iron-chromium alloy developed for exceptional corrosion resistance in both oxidizing and reducing environments. It was developed to provide exceptional resistance to numerous corrosive environments, both oxidizing and reducing.
The chromium and molybdenum content of Alloy 825 provides resistance to chloride pitting, as well as resistance to a variety of oxidizing atmospheres. It is resistant to corrosion in a wide variety of process environments including sulfuric, sulfurous, phosphoric, nitric, hydrofluoric and organic acids and alkalis such as sodium or potassium hydroxide, and acidic chloride solutions.

Spiral Wound Gasket Alloy 825 Applications:
Chemical processing equipments;
Food process equipment;
Nuclear;
Offshore oil and gas production;
Ore processing;
Steel processing;
Waste disposal.

Chemical Analysis:
(Yellow showing Minimum, Other showing Maximum)

Ni	Fe	Cr	Mo	Cu	Ti	C	Mn	S	Si	Al
38.0	22.0	19.5	2.5	1.5	0.6	0.05	1.00	0.03	0.5	0.2

Mechanical Properties:

0.2 percent offset Yield Strengh	Ultimate Tensile Strength	Elongation	Hardness
338 MPa	662 MPa	45 %	135~165 B

Physical Properties:
Density: 8.14 g/cm3
Melting Range: 1370 ~ 1400 oC

Corrosion Resistance:
The most outstanding attribute of Alloy 825 is its excellent corrosion resistance, in both oxidizing and reducing environments, the alloy resists general corrosion, pitting, crevice corrosion, intergranular corrosion and chloride stress-corrosion cracking.

Ordering Form:
ZD1206-825-R: 825 Strip, Graphite Filler or PTFE Filler, 825/FG or 825/PTFE;
ZD1206-825-CG: 825 Strip, Graphite or PTFE filler, 825, SS, or CS outer ring, 825/FG-CS;
ZD1206-825-CGI: 825 inner ring, 825 Strip, Graphite or PTFE filler, 825, SS, or CS outer ring, 825-825/FG-CS;
ZD1206-825-RIR: 800 inner ring, 825 strip, Graphite or PTFE Filler, Without outer ring, 825-825/FG;
Other styles according to requirements.